Metal Framing & Studs
Metal framing sections: C-purlins for roof and structural framing, metal studs and tracks for partitions, and furring and channel for ceilings. Galvanized for corrosion resistance, in standard gauges and lengths.
Product range
Also in stock
Where it's used
Roof Framing with Purlins
Roof sheets need purlins running across the trusses to fasten to. C-purlins in the right gauge and spacing carry the roofing load. We supply the common profiles in 6m lengths so your framer can run them out.
Drywall Partitions
Office walls and apartment partitions use metal studs and gypsum. Correct stud sizing prevents deflection and cracking of finishes. We match stud width to your wall height.
Suspended Ceilings
Drop ceilings hang from furring and carrying channel. Channel size and spacing must match the ceiling board and span. We supply furring, channel, wall angle, and the clips to tie it together.
How ordering works
Send room dimensions and stud spacing (typically 400mm or 600mm centers), or your purlin layout. We compute stud, track, purlin, and fastener counts and confirm stock and price.
What we can supply
Full product range
Common sizes, grades, and standards we stock or source for this category. Sizes and specs guide your order; send us your list and we will confirm stock and pricing.
Roof and Structural Framing
C-purlins
Common 2in x 3in and 2in x 4in profiles, 1.2mm to 2.0mm gauge, 6m lengths, for roof framing and light structural runs.
Furring and structural channel
Galvanized C-channel sections for framing, bracing, and support runs.
Wall Partition Framing (Drywall)
Metal studs
75mm width, 0.30mm, 0.40mm, and 0.50mm thickness, 3.0m length, galvanized.
Metal tracks
Matching 75mm tracks, 0.30mm, 0.40mm, and 0.50mm, 3.0m length, galvanized.
Ceiling Suspension Framing
Single and double furring
0.30mm, 0.40mm, and 0.50mm, 5.0m length, for ceiling framing.
Carrying channel (main channel)
0.30mm and 0.40mm, 5.0m length, runs perpendicular to furring.
Wall angle (perimeter trim)
1in x 1in, 0.30mm and 0.40mm, 3.0m length, frames ceiling edges.
Furring clips and W-clips
Galvanized clips to tie furring to carrying channel.
Common questions about metal framing & studs
What gauge and size of C-purlin do I need?
It depends on your purlin spacing and roof span. Closer spacing and shorter spans allow a lighter gauge; wider spacing needs a heavier one. Your fabricator or engineer specifies it. Tell us the profile (for example 2x3 or 2x4) and gauge and we will match it.
What stud thickness do I need for drywall partitions?
For ordinary interior partitions up to about 3 meters, 0.40mm studs at 400mm or 600mm spacing are the everyday spec. Taller walls, doors, and walls carrying cabinets do better with 0.50mm. Send your wall height and we will recommend the thickness.
Do you carry fire-rated studs?
We stock standard galvanized studs, tracks, and channel. If your project needs fire-rated sections, tell us the rating and we will try to source them for you.
Explore other categories
Need pricing on metal framing & studs?
Send the items and quantities, a specialist replies with pricing, stock, and delivery options within one business day.