Roofing & Corrugated Sheets
Corrugated metal roofing in all standard profiles, pre-painted and galvanized, plus the bended accessories that finish the roof. METASTEEL is our long-span roofing line, fabricated to your project needs and installed by our roofing team.
Product range
Also in stock
Where it's used
Industrial Warehouses and Factories
Large-span roofs over factories and storage need metal that spans 5 to 7 meters without intermediate purlins. METASTEEL long-span profiles reduce frame cost, with installation handled by our roofing team.
Agricultural and Farm Buildings
Barns and equipment sheds face wind and sun exposure. Pre-painted galvanized roofing resists rust in agricultural environments.
Commercial Sheds and Canopies
Gas stations and parking canopies use corrugated roofing for speed and economy.
How ordering works
Send your roof plan: total length (eaves to eaves), width, gable overhang, and required profile. We compute the sheet list with proper side laps (one and a half corrugations minimum), then quote fabrication and installation when needed.
What we can supply
Full product range
Common sizes, grades, and standards we stock or source for this category. Sizes and specs guide your order; send us your list and we will confirm stock and pricing.
Masterzinc GI Corrugated
GI corrugated sheet
Our Masterzinc line, gauge 24 and gauge 26, in 8ft, 10ft, and 12ft lengths, sold by the linear foot.
GI plain sheet
Flat galvanized sheet, gauge 22, 24, and 26, 3ft or 4ft by 8ft, for flashing, gutters, and fascia.
Rib-Type and Long-Span Roofing
Rib-type long-span panel
Trapezoidal profile, effective coverage about 1000mm to 1050mm, thickness 0.4mm, 0.5mm, 0.6mm, with side-lap clip for weather sealing.
High-rib structural profile
Deeper 50mm rib for wide purlin spans on warehouses and gyms, coverage about 980mm, 0.40mm to 0.80mm, galvanized or aluminum-zinc coated.
Long-span lengths
Available in long transportable lengths to minimize end laps, with installation available through our roofing team.
Bended Accessories and Flashings
Ridge caps and end flashings
Standard profiles, girths from 4in, 8ft lengths, 0.35mm to 0.60mm, plain GI or pre-painted to match the roof.
Valley gutters and covers
Valley gutters, valley covers, and secret gutters, 8ft lengths.
Gutters
Box, spanish, and inside gutters in standard profiles, pre-painted colors available.
Apron and wall flashings
Apron, wall, and end-wall flashings for roof-to-wall junctions.
Fascia, mouldings, and louvers
Metal fascia, C and center mouldings, louver blades and frames in standard profiles.
Masterlume Pre-Painted
Corrugated pre-painted (prime)
Our Masterlume line, gauge 20, 22, 24, and 26, in 8ft, 10ft, and 12ft, sold by the linear foot, corrugated or plain.
Long-span pre-painted
Rib-type long-span in pre-painted finish, 0.35mm to 0.60mm.
Pre-painted corrugated
Corrugated pre-painted sheets in a wide color range: gray, orange, brown, blue, green, ivory, and more.
Steel decking
1.00m coverage steel deck, 0.80mm and 1.00mm, for composite slab construction.
Common questions about roofing & corrugated sheets
What is the span limit for standard vs long-span roofing?
Standard corrugated wants closer purlin spacing; rib-type long-span profiles handle wider spans. Ask your engineer to confirm purlin spacing for your design, and we will match the sheet.
What is the difference between Masterzinc and Masterlume?
Masterzinc is our galvanized (GI) corrugated line; Masterlume is the pre-painted line. Both come in gauge 24 and 26 and in 8, 10, and 12 foot lengths, sold by the linear foot.
Can you match an existing roof color?
Pre-painted stock comes in a wide standard range: grays, browns, blues, greens, orange, and ivory among others. Bring a sample or a photo and we will match the nearest standard color.
Explore other categories
Need pricing on roofing & corrugated sheets?
Send the items and quantities, a specialist replies with pricing, stock, and delivery options within one business day.